{"title":"Jackson Audio","description":null,"products":[{"product_id":"jackson-audio-belle-starr-drew-shirley-signature-overdrive-pedal","title":"Jackson Audio BELLE STARR Drew Shirley Signature Overdrive Pedal","description":"\u003cp\u003eThe BELLE STARR is the result of a several months-long collaboration with Drew Shirley from the band Switchfoot. If you're familiar with Drew's rig, he has always run super small, low-wattage amps, and run them wide-open to get his signature overdriven sound. The BELLE STARR was designed to recreate these tones.\u003c\/p\u003e\n\u003cp\u003eNot a high-gain overdrive, the BELLE STARR is a low\/mid gain overdrive circuit that has the smooth and natural breakup that is characteristic in smaller, non-negative feedback amps. \u003c\/p\u003e\n\u003cp\u003eTo make the overdrive as natural-sounding and amp-like as possible, we incorporated a unique clipping circuit (the part of the circuit that distorts the signal) and features MOSFET transistors instead of traditional silicon diodes. When used in a clipping circuit, the MOSFET transistors produce a very smooth and amp-like overdrive.\u003c\/p\u003e\n\u003cp\u003eThe overdrive range on the BELLE STARR is so evenly spread out across the range of the GAIN control that it goes from absolutely clean to medium gain with no unusual jumps in the dynamic response. \u003c\/p\u003e\n\u003cp\u003eOver the 8 months that we spent dialing in the BELLE STARR, we have tried it with every variation of amp we could get our hands on. Fender, Marshall, Vox and of course our own Jackson amps. This was done to ensure that the BELLE STARR would work on any amp that you marry it to. \u003c\/p\u003e\n\u003cp\u003eWe are very proud of the work that we have done with Drew and believe that the BELLE STARR is a dynamic, expressive and natural sounding overdrive that will fit perfectly into any rig!\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430895677533,"sku":"BM302128186124","price":436.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/belle_starr_front.png?v=1778345806"},{"product_id":"jackson-audio-golden-boy-mini-rose-joey-landreth-signature-overdrive-pedal-rose","title":"Jackson Audio GOLDEN BOY MINI ROSE Joey Landreth Signature Overdrive Pedal - ROSE","description":"\u003cp\u003eThe Golden Boy Mini is the perfect addition to any guitarist’s arsenal, allowing you to shape and enhance your tone in ways you’ve never imagined. Its transparent nature ensures that your core tone remains intact, while adding a dynamic of warmth, richness, and depth that elevates your playing to new levels.\u003c\/p\u003e\n\u003cp\u003eIts intuitive controls allow you to dial in the perfect blend of overdrive, from subtle grit to soaring, harmonically rich tones. The pedal’s wide-ranging gain control ensures that it can adapt to any musical style or genre, whether you’re playing delicate fingerpicked melodies or unleashing blistering solos. Pair it with Asymmetrical or Led Clipping and put the final touches with it’s 3-band Baxandall-style EQ.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBeyond its exceptional sound, the Golden Boy Mini is built to withstand the rigors of the road. It's rugged construction and top-quality components ensure reliability and durability, making it a reliable companion for both studio sessions and live performances.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhether you’re a seasoned professional or an aspiring guitarist, the Golden Boy Mini will transform your tone and ignite your creativity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eDiscover the Golden Boy Mini and unlock the true potential of your guitar tone. Order yours today and witness the power of transparent overdrive like never before. Elevate your sound and embark on a sonic journey with the Golden Boy Mini!\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430895775837,"sku":"BM649985580611","price":331.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/roseanglenobackground_1800x1800_40afde93-84cd-4153-b944-94f4495c821f.png?v=1778345807"},{"product_id":"jackson-audio-golden-boy-mini-gld-joey-landreth-signature-overdrive-pedal-gold","title":"Jackson Audio GOLDEN BOY MINI GLD Joey Landreth Signature Overdrive Pedal - GOLD","description":"\u003cp\u003eThe Golden Boy Mini is the perfect addition to any guitarist’s arsenal, allowing you to shape and enhance your tone in ways you’ve never imagined. Its transparent nature ensures that your core tone remains intact, while adding a dynamic of warmth, richness, and depth that elevates your playing to new levels.\u003c\/p\u003e\n\u003cp\u003eIts intuitive controls allow you to dial in the perfect blend of overdrive, from subtle grit to soaring, harmonically rich tones. The pedal’s wide-ranging gain control ensures that it can adapt to any musical style or genre, whether you’re playing delicate fingerpicked melodies or unleashing blistering solos. Pair it with Asymmetrical or Led Clipping and put the final touches with it’s 3-band Baxandall-style EQ.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBeyond its exceptional sound, the Golden Boy Mini is built to withstand the rigors of the road. It's rugged construction and top-quality components ensure reliability and durability, making it a reliable companion for both studio sessions and live performances.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhether you’re a seasoned professional or an aspiring guitarist, the Golden Boy Mini will transform your tone and ignite your creativity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eDiscover the Golden Boy Mini and unlock the true potential of your guitar tone. Order yours today and witness the power of transparent overdrive like never before. Elevate your sound and embark on a sonic journey with the Golden Boy Mini!\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430895841373,"sku":"BM649985674068","price":331.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/goldanglenobackground_1800x1800_92f4651d-f585-4f0a-b077-7b2a77fde91e.png?v=1778345808"},{"product_id":"jackson-audio-1484-twin-twelve-preamp-pedal","title":"Jackson Audio 1484 TWIN TWELVE Preamp Pedal","description":"\u003cp\u003eIn 1963, history was made with the release of the Silvertone Twin Twelve Amplifier. Originally listed in the sears catalog as the 1484, the Twin Twelve was offered from 1963 to 1967 and became the most coveted of all the Silvertone amplifiers. The unique sound of this amplifier proudly powers the tones of many of today’s best rock icons such as Jack White, Dave Grohl, Beck, Billie Joe Armstrong (Green Day), Dan Auerbach (The Black Keys) and many more.\u003c\/p\u003e\n\u003cp\u003eToday Jackson Audio and Silvertone make history again with the introduction of the 1484 Twin Twelve Pedal.\u003c\/p\u003e\n\u003cp\u003eAn exact recreation of the legendary Twin Twelve amplifier, the 1484 Twin Twelve Pedal can be used as a studio-grade preamp, booster, EQ or overdrive depending on how the controls are set.\u003c\/p\u003e\n\u003cp\u003eBring back the classic Silvertone clean and overdriven tones and own the tone of legends. Relive history with the 1484 Twin Twelve Pedal.\u003c\/p\u003e\n\u003cp\u003e\"The 1484 Twin Twelve Pedal is a part-for-part recreation of the Silvertone Twin Twelve Amplifier. Not inspired by, or modeled after the original, the 1484 Twin Twelve Pedal takes the exact schematic from the legendary amplifier and replaces all of the vacuum tubes with JFET's. JFET's are a unique type of transistor that behave very much like vacuum tubes. These inherent features of JFET's are what give the 1484 Twin Twelve Pedal the same touch sensitivity and dynamic response as the original amplifier.\u003c\/p\u003e\n\u003cp\u003eTo gain every bit of performance and tone out of the JFET's, we built a robust power supply including a voltage doubler, which internally converts 9V to 18V so the JFET's have a much greater dynamic response and touch sensitivity when compared to pedals running at 9V.\u003c\/p\u003e\n\u003cp\u003eEach one of these pedals is built by hand, using top-quality parts, including a polished stainless steel enclosure just like the original amplifier chassis. Perhaps the most iconic visual element of the Silvertone 1484 Amplifier, the knobs, were no longer being made, so we custom manufactured them to recreate the classic look, in a size appropriate to the pedal’s dimensions.\u003c\/p\u003e\n\u003cp\u003eNo detail was overlooked in bringing this legendary circuit back in its original form, but we didn't stop there. To offer features that players need in this era, we included a soft-click true bypass foot switch, so your bypassed tone remains intact and the loud pop of switching is a thing of the past.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430895972445,"sku":"BM649985848032","price":436.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/72e4822828wpbc9riqfcse2r2q9gmhvkchaowzyf.png?v=1778345811"},{"product_id":"jackson-audio-broken-arrow-black-overdrive-pedal","title":"Jackson Audio BROKEN ARROW BLACK Overdrive Pedal","description":"\u003cp\u003eThe BROKEN ARROW is a very flexible overdrive with 4 presets for clipping options, an innovative gain adjustment feature that we call GAIN CYCLE, and a 3 band active EQ for maximum tonal flexibility. To top it off, we added a boost circuit which is the same type of MOSFET boost circuit found on our top selling PRISM Preamp pedal.\u003c\/p\u003e\n\u003cp\u003eBOOST OVERVIEW\u003cbr\u003eThe boost circuit is in its own true bypass loop which means it can be used independently of the DRIVE circuit. The boost circuit in the BROKEN ARROW is a MOSFET based boost much like the AMP MODE found in our best selling PRISM Preamp pedal. To activate\/deactivate the boost circuit simply press the BOOST footswitch.\u003c\/p\u003e\n\u003cp\u003eOne of the things that makes the boost in the BROKEN ARROW different from other boosts on the market is that it has 4 presets available. Each preset is EQ’d slightly differently to allow it to alter how it interacts with the overdrive circuit in the BROKEN ARROW or any other pedal you may have in your rig\u003c\/p\u003e\n\u003cp\u003ePreset 1 – YELLOW LED: Bright Boost. Very useful for creating a thinner sound or when boosting a thick sounding overdrive.Preset 2 – GREEN LED: Mid Boost. Not as thin as the yellow mode, the green mode allows more lows and takes on the character of a mid boost.\u003c\/p\u003e\n\u003cp\u003ePreset 3 – AQUA LED: Tailored Boost. Most people will find this a perfect setting that will complement most any overdrive setting in the BROKEN ARROW.\u003c\/p\u003e\n\u003cp\u003ePreset 4 – BLUE LED: Full Range. No tonal coloring here! Just your guitars natural tone!\u003c\/p\u003e\n\u003cp\u003eTo select a boost preset, press and hold the BOOST footswitch for more than 1 second and boost program mode will become active.\u003c\/p\u003e\n\u003cp\u003eWhen in this mode, the BOOST led will flash to indicate that you are in program mode. A quick tap on the BOOST footswitch will cycle the boost presets and you’ll be able to hear these presets change as you cycle through them, assuming that the boost circuit was active when the boost program mode was entered. Once you arrive at a boost preset that you want to use, press and hold the BOOST footswitch for more than 1 second and boost program mode will exit.\u003cbr\u003e \u003cbr\u003eEASTER EGG! There is an easter egg in the boost circuit of the BROKEN ARROW! The boost circuit is based on a MOSFET transistor which is a very popular type of transistor to use for boost circuits because it has many “amp like” characteristics when it clips etc. There can be downsides to this circuit though.Several very popular MOSFET boost circuits on the market have a very noticeable crackle when their boost knobs are rotated. We fixed this issue in the BROKEN ARROW and our boost is perfectly silent when the boost knob is rotated. The only downside to our fix of this problem is that we lose about 5% of the gain at the highest rotation setting. To most people this would never be a problem as the boost on the BROKEN ARROW is crushingly loud as it it.\u003c\/p\u003e\n\u003cp\u003eHowever if you are a purist, or you just want to hear the difference, I have good news for you. We included an internal jumper that you can move to go back to stock MOSFET boost operation with 100% gain and all the crackle your heart could ever desire! Quiet or Crackle. The choice is yours!\u003c\/p\u003e\n\u003cp\u003eSTND BOOST – Our version of the MOSFET boost. Same tone, no noise.\u003c\/p\u003e\n\u003cp\u003eALT BOOST – Modified version of the MOSFET boost. Same tone, slightly more gain, crackles when you turn the knob.\u003cbr\u003e \u003cbr\u003eOVERDRIVE OVERVIEW\u003cbr\u003eThe overdrive circuit of the BROKEN ARROW is a soft clipping overdrive circuit designed in the same vein as the venerable TS-808. The distinction between the TS-808 and the BROKEN ARROW being that there is no set “mid-hump” in the BROKEN ARROW and the tone is relatively flat when all controls are set at 12:00. Given that the BROKEN ARROW features an active 3 band EQ, there was no need to force a mid bump unnecessarily as a mid bump is easily achieved by increasing the MID knob.\u003c\/p\u003e\n\u003cp\u003eThe overdrive portion of the BROKEN ARROW is a completely new way of using and adjusting overdrive! With 4 clipping diode presets and our innovative GAIN CYCLE feature, the BROKEN ARROW will make most other overdrive pedals obsolete!\u003c\/p\u003e\n\u003cp\u003eCLIPPING DIODE PRESETS\u003cbr\u003eThe BROKEN ARROW allows for 4 different presets of clipping diodes which themselves drastically alter the tone and feel of the way the overdrive clips and distorts.\u003c\/p\u003e\n\u003cp\u003eTo select a clipping preset, press and hold the DRIVE footswitch for more than 1 second and the clipping program mode will become active. When in this mode, the DRIVE led will flash to indicate that you are in program mode. A quick tap on the DRIVE footswitch will cycle the clipping presets and you’ll be able to hear these presets change as you cycle through them, assuming that the drive circuit was active when the clipping program mode was entered. Once you arrive at a clipping preset that you want to use, press and hold the DRIVE footswitch for more than 1 second and clipping program mode will exit.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003ePreset 1 – GREEN: Classic Screamer. Two symmetrical silicon diodes give the classic drive and compression that the Tube Screamer is known for.\u003c\/p\u003e\n\u003cp\u003ePreset 2 – MAGENTA: Asymmetric Clipping. Three asymmetric silicon diodes will clip the top and bottom portions of your guitars waveform differently resulting in a more complex and interesting tone. This sounds great when laying down aggressive rhythm parts!\u003c\/p\u003e\n\u003cp\u003ePreset 3 – BLUE: Symmetrical Clipping. Four symmetric silicon diodes will clip the top and bottom portions of your guitars waveform evenly which gives a more focused and direct tone. One notable pedal that uses this style of clipping is the Timmy.\u003c\/p\u003e\n\u003cp\u003ePreset 4 – AMBER: Vintage Marshall. Two RED LED’s are used to symmetrically clip the top and bottom portions of your guitars waveform evenly. The LED’s allow MUCH higher headroom so your tone will stay more open and less compressed much like a vintage Marshall.\u003cbr\u003e \u003cbr\u003eChanging clipping diodes are a great way to radically change how an overdrive pedal sounds and feels but oftentimes the change that you perceive has more to do with a change in volume than an actual change in tone….until now!\u003c\/p\u003e\n\u003cp\u003eWhen we were designing the BROKEN ARROW we knew we wanted to give the overdrive section a lot of tonal flexibility and most importantly make that flexibility useful on stage. So when changing clipping diodes we included circuitry that level matches the output of the pedal as various clipping diodes are selected. So now you can select between all four clipping options, and your volume level will remain constant. More importantly, the difference that you hear between the clipping modes will be because of the difference in how those clipping diodes sound and not because your volume is jumping all over the place as it does with other designs.\u003c\/p\u003e\n\u003cp\u003eGAIN CYCLE\u003cbr\u003eThe most exciting feature of the BROKEN ARROW is the new feature that we developed called GAIN CYCLE. GAIN CYCLE takes the GAIN knob setting, which selects your maximum gain, and divides that level of gain into 4 equal parts. Say for instance you have your GAIN knob set at the maximum setting or in other words, 100% gain. Every time you press both footswitches simultaneously, the gain of the pedal will jump up 25% until you get to 100%. The following press after 100% will cause the gain cycle to start again at 25%.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eMy goal with the GAIN CYCLE feature is to allow guitarists to easily ramp their gain up without having to bend down and change it or try to adjust it with the edge of their foot while playing live. Here’s a perfect use case!\u003c\/p\u003e\n\u003cp\u003eLet’s assume the GAIN control is set to 100%\u003c\/p\u003e\n\u003cp\u003eVerse 1 – Gain cycle set at 25% – Slightly overdriven edge of breakup tone.\u003c\/p\u003e\n\u003cp\u003ePress GAIN CYCLE\u003c\/p\u003e\n\u003cp\u003eChorus – Gain cycle set at 50% – Distinct overdriven tone.\u003c\/p\u003e\n\u003cp\u003ePress GAIN CYCLE\u003c\/p\u003e\n\u003cp\u003eBridge – Gain cycle set at 75% – Heavy overdrive tone.\u003c\/p\u003e\n\u003cp\u003ePress GAIN CYCLE\u003c\/p\u003e\n\u003cp\u003eSolo – Gain cycle set at 100% – Heavily saturated overdriven tone!\u003c\/p\u003e\n\u003cp\u003eTIP: Add the BOOST to push the overdrive even harder for endless sustain!\u003c\/p\u003e\n\u003cp\u003eIt’s important to remember that GAIN CYCLE setting #4 (100%) will be as much gain as you have the GAIN knob set for. Think of the GAIN knob on the BROKEN ARROW as your maximum gain with each GAIN CYCLE setting being a percentage of that maximum value.\u003cbr\u003e \u003cbr\u003eThe brightness of the DRIVE led will change to let you know which percentage of gain you have selected. The higher the percentage, the brighter the DRIVE led. For instance:\u003c\/p\u003e\n\u003cp\u003eGAIN CYCLE #1 – DIM LED – 25% of GAIN knob value.\u003cbr\u003eGAIN CYCLE #2 – BRIGHTER LED – 50% of GAIN knob value.\u003cbr\u003eGAIN CYCLE #3 – BRIGHT LED – 75% of GAIN knob value.\u003cbr\u003eGAIN CYCLE #4 – VERY BRIGHT LED – 100% of GAIN knob value.\u003c\/p\u003e\n\u003cp\u003e3-BAND ACTIVE EQ\u003cbr\u003eTo top it off, the DRIVE circuit of the BROKEN ARROW has a 3 band active EQ. The EQ circuit features a studio grade EQ that gives tremendous tonal flexibility to the BROKEN ARROW. Based on the legendary Baxandall EQ that is featured in countless studio EQ’s, the BROKEN ARROW EQ takes this circuit and tailors it for guitarists! We spent tons of time on this EQ dialing it in so it would hit all the frequencies that guitarists need to adjust, and then sweetened it by removing the ear fatiguing highs and lows that can appear at extreme settings.\u003c\/p\u003e\n\u003cp\u003eEQUALIZER CIRCUIT FEATURES:\u003cbr\u003eStudio-grade EQ with High Bandwidth and Flat Response at 12:00\u003cbr\u003e+\/- 12dB Boost\/Cut per control\u003cbr\u003eCenter Detents on the pots that make it easier to get back to a neutral or flat response.\u003c\/p\u003e\n\u003cp\u003eMIDI – NEW FOR 2020!\u003cbr\u003eSince the BROKEN ARROW first came out, we have received many requests from our players saying that adding MIDI to the BROKEN ARROW would make it the perfect overdrive and we completely agree! As always, we take player feedback as a primary driver of product development and we are very proud to announce that the most flexible overdrive on the market just got better with the addition of MIDI!\u003c\/p\u003e\n\u003cp\u003eCABLE INFORMATION: In order to use MIDI on the BROKEN ARROW v2, you will need a cable that converts a MIDI (DIN-5) connector to a TRS cable. This is the cable that we have used with great success and can't recommend it enough.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.disasterareadesigns.com\/shop\/p\/5p-trs-pro-midi-cable\u003c\/p\u003e\n\u003cp\u003eFor those building their own cables, the BROKEN ARROW v2 receives MIDI information via the RING connection on a TRS (Tip, Ring, and Sleeve) connector.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCheck out this link for some detailed wiring: https:\/\/www.midi.org\/articles-old\/trs-specification-adopted-and-released\u003c\/p\u003e\n\u003cp\u003eMIDI CHANNEL\u003cbr\u003eBy default, the BROKEN ARROW v2 ships with MIDI Channel 1 being the selected channel. This can be changed by pressing and holding the DRIVE footswitch while applying power to the BROKEN ARROW. Press the BOOST footswitch to increment the MIDI channel number.\u003c\/p\u003e\n\u003cp\u003eYou’ll notice that as you continue to hold the DRIVE footswitch, the BOOST LED will flash to indicate which MIDI channel you have selected. IE – 7 flashes = MIDI Channel 7. After the LED flashes, we inserted a 2-second pause so you could tell when the LED was finished flashing. The LED will continue flashing as long as you are holding down the DRIVE footswitch. Once you have selected the MIDI channel you want and have verified it by counting the flashes, simply release the DRIVE footswitch and the pedal will save this MIDI Channel to the internal EEPROM on the microprocessor and reboot.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMIDI DETAILS\u003cbr\u003eAccessing the new MIDI features of the BROKEN ARROW is done by Control Changes. Below is a list of the features of the BROKEN ARROW that can be accessed via MIDI as well as how to access them.\u003c\/p\u003e\n\u003cp\u003eCC #1 – DRIVE ON\/OFF (value of 127 = ON \/value of 0 = OFF)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCC #2 – BOOST ON\/OFF (value of 127 = ON \/value of 0 = OFF)\u003c\/p\u003e\n\u003cp\u003eCC #3 – CLIPPING DIODES\u003cbr\u003e (value of 1 = 2x SYMETRICAL DIODES)\u003cbr\u003e (value of 2 = 3x ASYMETRICAL DIODES)\u003cbr\u003e (value of 3 = 4x SYMETRICAL DIODES)\u003cbr\u003e (value of 4 = 2x SYMETRICAL RED LED's)\u003c\/p\u003e\n\u003cp\u003eCC #4 – GAIN CYCLE\u003cbr\u003e (value of 1 = 25% GAIN)\u003cbr\u003e (value of 2 = 50% GAIN)\u003cbr\u003e (value of 3 = 75% GAIN)\u003cbr\u003e (value of 4 = 100% GAIN)\u003c\/p\u003e\n\u003cp\u003eCC #5 – BOOST EQ\u003cbr\u003e (value of 1 = BRIGHT BOOST)\u003cbr\u003e (value of 2 = MID BOOST)\u003cbr\u003e (value of 3 = TAILORED BOOST)\u003cbr\u003e (value of 4 = FULL BOOST)\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430896103517,"sku":"BM600093087560","price":493.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/f49d1e2a27cfuqacpo05qyi1msw6ft2f46bl4oyv.png?v=1778345813"},{"product_id":"jackson-audio-large-mouse-module-for-asabi-pedal","title":"Jackson Audio LARGE MOUSE Module for Asabi Pedal","description":"\u003cp\u003eInspired by your favorite rodent based distortion, the Large Mouse Analog Plug-In captures all the snarl and spit of the legendary subway dwelling rodent and allows you to upgrade your Asabi with an entirely new voice!\u003c\/p\u003e\n\u003cp\u003eWith 4 available clipping presets and our exclusive Gain Cycle technology, the LARGE MOUSE is so battle ready that even Master Splinter would be proud!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note - this is a module only for the Asabi pedal. Pedal sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen the LARGE MOUSE plug-in is installed, the Asabi is transformed from a refined high-gain machine into a snarling animal! Crank the GAIN control and the LARGE MOUSE will let loose the spitting distortion that defined the punk rock era!\u003c\/p\u003e\n\u003cp\u003eDISTORTION PRESETS\u003c\/p\u003e\n\u003cp\u003eThe LARGE MOUSE allows for 4 different presets of clipping diodes which themselves drastically alter the tone and feel of the way the distortion clips.\u003c\/p\u003e\n\u003cp\u003eTo select a clipping preset, press and hold the DIST footswitch for more than 1 second and the clipping program mode will become active. When in this mode, the DIST led will flash to indicate that you are in programming mode. A quick tap on the DIST footswitch will cycle the clipping presets and you’ll be able to hear these presets change as you cycle through them, assuming that the drive circuit was active when the clipping program mode was entered. Once you arrive at a distortion preset that you want to use, press and hold the DIST footswitch for more than 1 second and clipping program mode will exit.\u003c\/p\u003e\n\u003cp\u003ePreset 1 - AMBER: Turbo Large Mouse. Two LED’s are used to symmetrically clip the top and bottom portions of your guitars waveform evenly. The LED’s allow MUCH higher headroom so your tone will stay more open and less compressed much like a vintage Marshall. This setting is perfect for punk rock!\u003c\/p\u003e\n\u003cp\u003ePreset 2 - GREEN: Stock Large Mouse. Two symmetrical silicon diodes give the classic drive and compression that the original is known for.\u003c\/p\u003e\n\u003cp\u003ePreset 3 – BLUE: Asymmetric High Gain. Three asymmetric diodes (two silicon and one LED) will clip the top and bottom portions of your guitars waveform differently resulting in a more complex and interesting tone. This sounds great when laying down aggressive rhythm parts!\u003c\/p\u003e\n\u003cp\u003ePreset 4 - MAGENTA: Symmetric High Gain. Four symmetric silicon diodes will clip the top and bottom portions of your guitars waveform evenly which gives a more focused and direct tone.\u003c\/p\u003e\n\u003cp\u003eChanging clipping diodes are a great way to radically change how a distortion pedal sounds and feels but oftentimes the change that you perceive has more to do with a change in volume than an actual change in tone….until now!\u003c\/p\u003e\n\u003cp\u003eWhen we were designing the ASABI we knew we wanted to give the distortion section a lot of tonal flexibility and most importantly make that flexibility useful on stage. So when changing clipping presets on the LARGE MOUSE we included circuitry that level matches the output of the pedal as various clipping diodes are selected. So now you can select between all four clipping options, your volume level will remain constant. More importantly, the difference that you hear between the clipping presets will be because of the difference in how those clipping diodes sound and not because your volume is jumping all over the place as it does with other designs. \u003c\/p\u003e\n\u003cp\u003eSIMPLE TO INSTALL\u003cbr\u003eTo install the LARGE MOUSE plug-in, please perform the following steps:\u003c\/p\u003e\n\u003cp\u003e1) - Remove the back panel of the pedal using a Phillips screwdriver\u003c\/p\u003e\n\u003cp\u003e2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.\u003c\/p\u003e\n\u003cp\u003e3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards. \u003c\/p\u003e\n\u003cp\u003e4) - Reinstall the back panel of the pedal.\u003c\/p\u003e\n\u003cp\u003e5) - Melt faces.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430896169053,"sku":"BM702940700216","price":103.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/largemousecardw_white_1800x1800_df8c1354-c755-405e-bd35-e21f0f136fb3.png?v=1778345814"},{"product_id":"jackson-audio-asabi-mateus-asato-signature-overdrive-distortion-pedal","title":"Jackson Audio ASABI Mateus Asato Signature Overdrive \/ Distortion Pedal","description":"\u003cp\u003eThe Mateus Asato Signature Pedal, the ASABI, is a distortion and overdrive pedal that contains a HUGE array of tones and is also the world's first pedal to feature analog distortion plug-ins!\u003c\/p\u003e\n\u003cp\u003eTo keep things interesting on your pedalboard, we developed the technology to create replaceable distortion plug-ins so you can swap the distortion circuit in the ASABI without having to buy a completely new pedal! Because we all like to try out new pedals, these affordable plug-ins allow you to buy the pedal once and update it with new plug-ins all the time!\u003c\/p\u003e\n\u003cp\u003eThe name ASABI, which means, \"of unusual birth\" was chosen by Mateus because it speaks to the unique nature of this pedal, as well as his own family heritage. Keep reading below to learn more about how the ASABI can bring your tone to life in new and creative ways!\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430896201821,"sku":"BM600093087546","price":654.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/36502c51aetddry4dwjvpqi7logzjvgbit1dlktp.png?v=1778345815"},{"product_id":"jackson-audio-golden-boy-joey-landreth-signature-overdrive-pedal","title":"Jackson Audio GOLDEN BOY Joey Landreth Signature Overdrive Pedal","description":"\u003cp\u003eThe Golden Boy Transparent Overdrive (designed in collaboration with Joey Landreth) is the most versatile and transparent overdrive ever made.\u003c\/p\u003e\n\u003cp\u003eRich in harmonic detail and overflowing with headroom, the Golden Boy redefines the concept of transparent overdrive and brings it up to date with modern features never before seen in an overdrive pedal.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430896398429,"sku":"BM302128186155","price":498.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/5e14afc17chz7a0fu4hw8ybuuhhb2vvawv4zwkjq.png?v=1778345818"},{"product_id":"jackson-audio-the-optimist-cory-wong-signature-dual-overdrive-pedal","title":"Jackson Audio THE OPTIMIST Cory Wong Signature Dual Overdrive Pedal","description":"\u003cp\u003eOD1 of the OPTIMIST is based on the most expensive, hard-to-find, mythical overdrive ever created! For all of its hype, this magical pedal is still one of the most natural-sounding overdrives ever created and has cemented its reputation in the history of guitardom.\u003c\/p\u003e\n\u003cp\u003eWe reproduced this circuit in perfect detail to provide the stock tone that people are looking for from this legendary pedal. We updated it with an active EQ (bypass-able) to take this classic circuit into uncharted territory!\u003c\/p\u003e\n\u003cp\u003eJust like the original circuit, OD1 features impossible to find (unless you know how to use eBay) germanium diodes that have been carefully washed in unicorn tears to deliver the best tone possible! Why? Because you deserve the best. You deserve diodes that have been washed in unicorn tears.\u003c\/p\u003e\n\u003cp\u003eOD 2\u003cbr\u003eOD2 of the OPTIMIST stands in stark contrast to the mid-focused tone of OD1. Designed to be perfectly flat across the full range of the guitar, OD2 is perfect for rhythm work and is a perfect harmonic enhancer for OD1 when you want to boost OD1 even further!\u003c\/p\u003e\n\u003cp\u003e3 BAND EQUALIZER OVERVIEW\u003cbr\u003eThe EQ circuit features a studio-grade EQ that gives tremendous tonal flexibility to The Optimist. Based on the legendary Baxandall EQ that is featured in countless studio EQ’s, The Optimist EQ takes this circuit and tailors it for guitarists! We spent tons of time on this EQ dialing it in so it would hit all the frequencies that guitarists need to adjust and then sweetened it by removing the ear fatiguing highs and lows that can appear at extreme settings.\u003c\/p\u003e\n\u003cp\u003eTo activate the EQ, press and release both the OD1 and OD2 footswitches.\u003c\/p\u003e\n\u003cp\u003eThe EQ is post OD's and can also be used as a standalone feature. The controls for the EQ light up to show that the EQ is activated.\u003c\/p\u003e\n\u003cp\u003eEQUALIZER CIRCUIT FEATURES:\u003cbr\u003eStudio-grade EQ with High Bandwidth and Flat Response at 12:00\u003cbr\u003e+\/- 12dB Boost\/Cut per control\u003cbr\u003eCenter Detents on the pots that make it easier to get back to a neutral or flat response.\u003c\/p\u003e\n\u003cp\u003eMIDI FEATURES\u003cbr\u003eThe Optimist features MIDI control over all functions! OD1, OD2 and EQ can all be controlled via MIDI for an unlimited selection of tones.\u003cbr\u003eWe always want to make sure that our pedals are as easy to integrate into complex rigs as they are into simple rigs and MIDI makes that happen!\u003cbr\u003eCABLE INFORMATION: In order to use MIDI, you will need a cable that converts a MIDI (DIN-5) connector to a TRS cable. This is the cable that we have used with great success and can't recommend it enough.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.disasterareadesigns.com\/shop\/p\/5p-trs-pro-midi-cable\u003c\/p\u003e\n\u003cp\u003eFor those building their own cables, The Optimist receives MIDI information via the RING connection on a TRS (Tip, Ring, and Sleeve) connector.\u003c\/p\u003e\n\u003cp\u003eCheck out this link for some detailed wiring: https:\/\/www.midi.org\/articles- old\/trs-specification-adopted-and-released\u003c\/p\u003e\n\u003cp\u003eMIDI CHANNEL\u003cbr\u003eBy default, the The Optimist ships with MIDI Channel 1 being the selected channel. This can be changed by pressing and holding the OD 1 footswitch while applying power. Press the OD 2 footswitch to increment the MIDI channel number.\u003c\/p\u003e\n\u003cp\u003eYou’ll notice that as you continue to hold the OD1 footswitch, the OD 2 LED will flash to indicate which MIDI channel you have selected. IE – 7 flashes = MIDI Channel 7. After the LED flashes, we inserted a 2-second pause so you could tell when the LED was finished flashing. The LED will continue flashing as long as you are holding down the OD 1 footswitch. Once you have selected the MIDI channel you want and have verified it by counting the flashes, simply release the OD 1 footswitch and the pedal will save this MIDI Channel to the internal EEPROM on the microprocessor and reboot.\u003c\/p\u003e\n\u003cp\u003eMIDI DETAILS\u003cbr\u003eAccessing the new MIDI features is done by Control Changes. Below is a list of the features that can be accessed via MIDI as well as how to access them.\u003c\/p\u003e\n\u003cp\u003eCC #1 – OD 1 ON\/OFF (value of 127 = ON \/value of 0 = OFF)\u003cbr\u003eCC #2 – OD 2 ON\/OFF (value of 127 = ON \/value of 0 = OFF)\u003cbr\u003eCC #3 – EQ ON\/OFF (value of 127 = ON \/value of 0 = OFF)\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430896463965,"sku":"BM702940700247","price":654.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/26a98e786bvtl1oemmit7gltnpowpbtxtl2ofk6r.png?v=1778345820"},{"product_id":"jackson-audio-modern-fuzz-deluxe-module-for-modular-fuzz","title":"Jackson Audio MODERN FUZZ DELUXE Module For Modular Fuzz","description":"\u003cp\u003eLike the MODERN FUZZ plug-in, the MODERN FUZZ DELUXE plug-in expands the tones available in this plug-in by adding two additional types of clipping. With the jumper set in the DIST (distortion) position, the clipping is smoother and with more headroom. With the jumper set in the OD (overdrive) position, the clipping is smoother still and has the feel and vibe of a vintage overdrive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note - this is a module only for the Modular Fuzz pedal. Pedal sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo install the FUZZ MODULE, please perform the following steps:\u003c\/p\u003e\n\u003cp\u003e1) - Remove the back panel of the pedal using a Phillips screwdriver\u003c\/p\u003e\n\u003cp\u003e2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.\u003c\/p\u003e\n\u003cp\u003e3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards.\u003c\/p\u003e\n\u003cp\u003e4) - Reinstall the back panel of the pedal.\u003c\/p\u003e\n\u003cp\u003e5) - Melt faces.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430916354141,"sku":"BM600093087584","price":103.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/modernfuzzdeluxe_1800x1800_3e1bb745-6c00-464a-aac7-104f159f594d.png?v=1778346133"},{"product_id":"jackson-audio-page-mark-ii-module-for-modular-fuzz","title":"Jackson Audio PAGE MARK II Module For Modular Fuzz","description":"\u003cp\u003eThe sound of Led Zeppelin! If you like your fuzz to be completely rude and unruly, this is your fuzz! Full of snarl and spit, the FUZZ PAGE MARK II plug-takes the FUZZ and turns it into a classic rock machine!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note - this is a module only for the Modular Fuzz pedal. Pedal sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTo install the FUZZ MODULE, please perform the following steps:\u003c\/p\u003e\n\u003cp\u003e1) - Remove the back panel of the pedal using a Phillips screwdriver\u003c\/p\u003e\n\u003cp\u003e2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.\u003c\/p\u003e\n\u003cp\u003e3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards. \u003c\/p\u003e\n\u003cp\u003e4) - Reinstall the back panel of the pedal.\u003c\/p\u003e\n\u003cp\u003e5) - Melt faces.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430916386909,"sku":"BM600093087614","price":103.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/fuzzpagemkii_1800x1800_a2ac73e1-d765-4012-9044-80a1e1464de9.png?v=1778346131"},{"product_id":"jackson-audio-goat-head-module-for-modular-fuzz","title":"Jackson Audio GOAT HEAD Module For Modular Fuzz","description":"\u003cp\u003eBased on the legendary Big Muff Pi Ram's Head, the GOAT HEAD is the sound of Pink Floyd! Insane levels of fuzz and sustain are hallmarks of this circuit, but this plug-in does something that no other Big Muff can do! With the parametric EQ on the FUZZ, you can adjust the EQ so you can bring the mids forward on this circuit! Also included on the plug-in board are TONE and GAIN trimmers so you can fine tune the classic Big Muff tone control and adjust the overall gain style of the circuit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note - this is a module only for the Modular Fuzz pedal. Pedal sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTo install the FUZZ MODULE, please perform the following steps:\u003c\/p\u003e\n\u003cp\u003e1) - Remove the back panel of the pedal using a Phillips screwdriver\u003c\/p\u003e\n\u003cp\u003e2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.\u003c\/p\u003e\n\u003cp\u003e3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards. \u003c\/p\u003e\n\u003cp\u003e4) - Reinstall the back panel of the pedal.\u003c\/p\u003e\n\u003cp\u003e5) - Melt faces.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430916419677,"sku":"BM600093087621","price":103.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/goathead_1800x1800_014389b1-6ff3-49af-be1b-0d7b8df1783a.png?v=1778346133"},{"product_id":"jackson-audio-classic-modern-module-for-modular-fuzz","title":"Jackson Audio CLASSIC MODERN Module For Modular Fuzz","description":"\u003cp\u003eThe classic Fuzz with the smiley Face! This plug-in has high gain and a tighter\/crisper feel. This plug-in is perfect for the later Jimi era tones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note - this is a module only for the Modular Fuzz pedal. Pedal sold separately.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eTo install the FUZZ MODULE, please perform the following steps:\u003c\/p\u003e\n\u003cp\u003e1) - Remove the back panel of the pedal using a Phillips screwdriver\u003c\/p\u003e\n\u003cp\u003e2) - Lift up on the sides of the plug-in that is currently installed until the plug-in lifts up and out.\u003c\/p\u003e\n\u003cp\u003e3) - Take the new plug-in and align the pins of the three headers into the header sockets and gently press into position. NOTE: The plug-in is keyed so that it cannot be installed backwards. \u003c\/p\u003e\n\u003cp\u003e4) - Reinstall the back panel of the pedal.\u003c\/p\u003e\n\u003cp\u003e5) - Melt faces.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430916649053,"sku":"BM600093087607","price":103.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/fuzzclassicmodern_1800x1800_adb7113e-63eb-4105-88a5-22b42f61fa15.png?v=1778346137"},{"product_id":"jackson-audio-modular-fuzz-pedal","title":"Jackson Audio MODULAR FUZZ Pedal","description":"\u003cp\u003eThe idea of creating a modular fuzz came about as we were trying to decide which style of fuzz would be the most musical fuzz of all time. The answer quickly became, \"All of them!\" All of them are different, and all of them bring something unique sonically.\u003c\/p\u003e\n\u003cp\u003eWith the FUZZ, you can update your fuzz sound completely with our analog plug-ins and turn your pedal into a whole new pedal with a simple and affordable plug-in swap.\u003c\/p\u003e\n\u003cp\u003eANALOG PLUG-INS\u003cbr\u003eThe idea of creating a modular fuzz came about as we were trying to decide which style of fuzz would be the most musical fuzz of all time. The answer quickly became, \"All of them!\" All of them are different, and all of them bring something unique sonically. \u003c\/p\u003e\n\u003cp\u003eMODERN FUZZ - From vintage style fuzz at lower settings to snarling spitting fuzz at higher settings the MODERN FUZZ plug-in does it all and cleans up beautifully when your guitars volume control is lowered. This is the plug-in that the FUZZ ships with.\u003c\/p\u003e\n\u003cp\u003e*The FUZZ ships with this module installed. Other modules available separately.\u003c\/p\u003e\n\u003cp\u003eHow you EQ your tone, and especially the mids, are where the guitar makes its stand. Not enough mids and your guitar is lost in the mix. Too much highs and your tone is piercing and off putting. Too much bass and you compete sonically with the bass drum and bass player. With the parametric EQ on the FUZZ, you have 9 controls at your disposal to fully sculpt your tone and make sure the riffs you are laying down are NEVER lost in the mix!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBASS LEVEL - External knob. Adjusts for more or less bass. +\/- 20dB\u003cbr\u003eBASS FREQ - Internal trimmer. Selects which bass frequency is being adjusted.\u003cbr\u003eBASS Q - Internal trimmer. Adjusts how narrow or wide the selected frequency is.\u003c\/p\u003e\n\u003cp\u003eMID LEVEL - External knob. Adjusts for more or less mids. +\/- 20dB\u003cbr\u003eMID FREQ - External knob. Selects which mid frequency is being adjusted.\u003cbr\u003eMID Q - Internal trimmer. Adjusts how narrow or wide the selected frequency is.\u003c\/p\u003e\n\u003cp\u003eTREBLE LEVEL - External knob. Adjusts for more or less treble. +\/- 20dB\u003cbr\u003eTREBLE FREQ - Internal trimmer. Selects which treble frequency is being adjusted.\u003cbr\u003eTREBLE Q - Internal trimmer. Adjusts how narrow or wide the selected frequency is.\u003c\/p\u003e\n\n\u003cp\u003eOCTAVE\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eA good fuzz and a good octave pedal go hand in hand. Jimi knew it. Stevie knew it. And you know it. If you want to put some purple in your haze, you're going to need an octave pedal and the octave circuit in the FUZZ is outstanding!\u003c\/p\u003e\n\u003cp\u003eCovering everything from perfectly pure octave up to screaming splatting sonic mayhem, the octave circuit in the FUZZ is the perfect marriage of vintage and modern thanks to its unique octave BLEND control.\u003c\/p\u003e\n\u003cp\u003eThe BLEND control mixed your clean signal with the fuzz\/octave signal so you can dial in precisely how much octave effect you want. Guys like Doyle Bramhall II use this to great effect by adding just a little octave to their sound which gives is a little \"lift\".\u003c\/p\u003e\n\u003cp\u003eWith the BLEND control fully counterclockwise, the octave circuit acts as a boost and is perfect for slamming the front of the fuzz circuit for more gain! Pro Tip! Boost + Fuzz Face = Tone Bender! This boost is also perfect for boosting the front of other pedals or just running as an always on signal buffer\/booster.\u003c\/p\u003e\n\u003cp\u003eWith the BLEND control fully clockwise, there is no clean blend so your signal is fully fuzzed out with however much fuzz\/octave you have dialed in with the OCT control.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430916681821,"sku":"BM600093087553","price":493.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/71e-rk9bxol._ac_uf894_1000_ql80.png?v=1778346138"},{"product_id":"jackson-audio-amp-mode-boost-pedal","title":"Jackson Audio AMP MODE Boost Pedal","description":"\u003cp\u003eThe AMP MODE Boost is a MOSFET transistor boost and is the exact same circuit that is found in our best selling PRISM Preamp! Ask anyone who owns a PRISM and they'll most likely tell you that their favorite mode of the PRISM is the AMP MODE.\u003c\/p\u003e\n\u003cp\u003eSince we released the PRISM in 2016, we have been inundated with requests to come out with a stand-alone product based on the AMP MODE of the PRISM. You asked and we listened!\u003c\/p\u003e\n\u003cp\u003eThe AMP MODE circuit is based on a MOSFET transistor which is a very popular type of transistor to use for boost circuits because it has many “amp like” characteristics when it clips etc. There can be downsides to this circuit though.\u003c\/p\u003e\n\u003cp\u003eSeveral very popular MOSFET boost circuits on the market have a very noticeable crackle when their boost knobs are rotated. We fixed this issue in the AMP MODE so it is perfectly silent when the boost knob is rotated and delivers nothing but a crushingly loud and harmonically rich boost!\u003c\/p\u003e\n\u003cp\u003eUse the AMP MODE as a preamp for your overall signal, a boost to push an overdrive pedal even further into saturation, or as a post overdrive boost to clarify and push your guitar forward in the mix! The AMP MODE features 9-18V operation, true bypass switching and a tiny footprint featuring top mounted jacks!\u003c\/p\u003e\n\u003cp\u003eTONE TIP!\u003c\/p\u003e\n\u003cp\u003e\"One of the most powerful things about the AMP MODE is how well it stacks with other pedals as well as it self! For years I have run two MOSFET boosts on my pedalboard with a Klon in between them. I used one of the boosts as an always on boost, and added a second boost when I wanted an overdriven rhythm tone. Finally when I wanted a saturated lead tone I would kick on the Klon and the two boosts along with the Klon would give me a super articulate and saturated lead tone.\" - Brad Jackson \u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430923006045,"sku":"BM302128186131","price":261.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/w-amp-front_skinny.png?v=1778346258"},{"product_id":"jackson-audio-prism-blue-preamp-pedal","title":"Jackson Audio PRISM BLUE Preamp Pedal","description":"\u003cp\u003eThe PRISM was designed using a systems approach to tone shaping. While the PRISM contains many features and circuits, those circuits are precisely crafted to work in harmony with each other to create a unique tone shaping tool with unrivaled flexibility and performance!\u003c\/p\u003e\n\u003cp\u003eHoused in a custom designed stainless steel enclosure that features laser engraved artwork, the PRISM is one of the few pedals on the market that looks as good as it sounds! Keep reading below to learn more about what makes the PRISM so unique!\u003c\/p\u003e\n\u003cp\u003eEQ\/TONE SCULPTING\u003cbr\u003eThe PRISM was conceived between Brad and Nigel as a tool that players could use to unify their rigs regardless of the guitar being used. Since many guitarists will swap guitars but keep the same pedalboard and amp, we wanted to create a tool that would allow the players to re-voice their rigs for the guitar chosen and the +\/-15dB active EQ in the PRISM accomplishes this with ease.\u003c\/p\u003e\n\u003cp\u003eThis active EQ gives an incredible amount of tonal control and range and has ZERO interaction between the BODY and TONE controls. Having ZERO interaction means as the player adjusts the TONE it will only adjust the high frequency response and not cause the low frequencies to shift and the same is true for the BODY control.\u003c\/p\u003e\n\u003cp\u003ePerhaps the most useful feature of the active EQ in the PRISM is that when placed at the front of the players rig and used as a master EQ, the PRISM will allow the player to dial in their tone using ONE pedal and will prevent them from having to adjust the EQ of every pedal in their rig when changing guitars, amps or venues.\u003c\/p\u003e\n\u003cp\u003eBOOST\/PREAMP\u003cbr\u003eAs a boost\/preamp the PRISM contains three of the most distinct voices of boosts available. A transparent clean boost with no tonal coloring (TRANS), a boost that emulates a vacuum tube amp (AMP) and finally the boost circuit that started it all, the silicon treble booster (COLOR). These three circuits represent over 50 years of guitar effects from the earliest guitar pedal ever made to the more modern transparent voiced circuits.\u003c\/p\u003e\n\u003cp\u003eEach boost\/preamp circuit in the PRISM is totally discrete and shares ZERO circuitry with the other boost circuits. We did this so that each circuit would be completely true to its own voice and not have to compromise its sound for the sake of cost cutting or space economy. In fact every circuit is contained in its own true bypass loop so there is never any additional circuitry in the signal path.\u003c\/p\u003e\n\u003cp\u003eTraditionally most players will use a boost\/preamp pedal to drive the front end of a tube amp into overdrive and the PRISM does this very well given its huge amount of output however we encourage players to experiment by placing the PRISM at the front of their pedalboards and enjoy the host of new tones available as the PRISM boosts their existing pedals!\u003c\/p\u003e\n\u003cp\u003eNote: To take full advantage of the PRISM we recommend placing it first in the signal chain as its active EQ will be most effective in that position and the treble booster circuit (COLOR) works best when connected directly to the guitars output. Treble booster circuits in general are known for cleaning up very dramatically when rolling back the volume control on the guitar and the PRISM is no different. For these reasons we recommend that the PRISM be placed first in the signal chain.\u003c\/p\u003e\n\u003cp\u003eBUFFER\u003cbr\u003eThe PRISM is a true bypass pedal featuring our own silent switching circuitry and uses relays with a soft touch momentary contact footswitch to accomplish the bypass. We chose relay bypass because it is far more reliable than traditional mechanical true bypass methodologies and the relays themselves boast a lifespan of over 100,000 cycles!\u003c\/p\u003e\n\u003cp\u003eAt the very end of the PRISM we included a high current buffer that is used to strengthen your signal and preserve your tone regardless of how complex your pedalboard is or how long the cable run is back to your amp.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430923038813,"sku":"BM302128186094","price":470.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/34180f41dfxxzxdrcae0fzvwk4kikkycipzlefl1.png?v=1778346260"},{"product_id":"jackson-audio-prism-black-preamp-pedal","title":"Jackson Audio PRISM BLACK Preamp Pedal","description":"\u003cp\u003eThe PRISM was designed using a systems approach to tone shaping. While the PRISM contains many features and circuits, those circuits are precisely crafted to work in harmony with each other to create a unique tone shaping tool with unrivaled flexibility and performance!\u003c\/p\u003e\n\u003cp\u003eHoused in a custom designed stainless steel enclosure that features laser engraved artwork, the PRISM is one of the few pedals on the market that looks as good as it sounds! Keep reading below to learn more about what makes the PRISM so unique!\u003c\/p\u003e\n\u003cp\u003eEQ\/TONE SCULPTING\u003cbr\u003eThe PRISM was conceived between Brad and Nigel as a tool that players could use to unify their rigs regardless of the guitar being used. Since many guitarists will swap guitars but keep the same pedalboard and amp, we wanted to create a tool that would allow the players to re-voice their rigs for the guitar chosen and the +\/-15dB active EQ in the PRISM accomplishes this with ease.\u003c\/p\u003e\n\u003cp\u003eThis active EQ gives an incredible amount of tonal control and range and has ZERO interaction between the BODY and TONE controls. Having ZERO interaction means as the player adjusts the TONE it will only adjust the high frequency response and not cause the low frequencies to shift and the same is true for the BODY control.\u003c\/p\u003e\n\u003cp\u003ePerhaps the most useful feature of the active EQ in the PRISM is that when placed at the front of the players rig and used as a master EQ, the PRISM will allow the player to dial in their tone using ONE pedal and will prevent them from having to adjust the EQ of every pedal in their rig when changing guitars, amps or venues.\u003c\/p\u003e\n\u003cp\u003eBOOST\/PREAMP\u003cbr\u003eAs a boost\/preamp the PRISM contains three of the most distinct voices of boosts available. A transparent clean boost with no tonal coloring (TRANS), a boost that emulates a vacuum tube amp (AMP) and finally the boost circuit that started it all, the silicon treble booster (COLOR). These three circuits represent over 50 years of guitar effects from the earliest guitar pedal ever made to the more modern transparent voiced circuits.\u003c\/p\u003e\n\u003cp\u003eEach boost\/preamp circuit in the PRISM is totally discrete and shares ZERO circuitry with the other boost circuits. We did this so that each circuit would be completely true to its own voice and not have to compromise its sound for the sake of cost cutting or space economy. In fact every circuit is contained in its own true bypass loop so there is never any additional circuitry in the signal path.\u003c\/p\u003e\n\u003cp\u003eTraditionally most players will use a boost\/preamp pedal to drive the front end of a tube amp into overdrive and the PRISM does this very well given its huge amount of output however we encourage players to experiment by placing the PRISM at the front of their pedalboards and enjoy the host of new tones available as the PRISM boosts their existing pedals!\u003c\/p\u003e\n\u003cp\u003eNote: To take full advantage of the PRISM we recommend placing it first in the signal chain as its active EQ will be most effective in that position and the treble booster circuit (COLOR) works best when connected directly to the guitars output. Treble booster circuits in general are known for cleaning up very dramatically when rolling back the volume control on the guitar and the PRISM is no different. For these reasons we recommend that the PRISM be placed first in the signal chain.\u003c\/p\u003e\n\u003cp\u003eBUFFER\u003cbr\u003eThe PRISM is a true bypass pedal featuring our own silent switching circuitry and uses relays with a soft touch momentary contact footswitch to accomplish the bypass. We chose relay bypass because it is far more reliable than traditional mechanical true bypass methodologies and the relays themselves boast a lifespan of over 100,000 cycles!\u003c\/p\u003e\n\u003cp\u003eAt the very end of the PRISM we included a high current buffer that is used to strengthen your signal and preserve your tone regardless of how complex your pedalboard is or how long the cable run is back to your amp.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430923268189,"sku":"BM302128186100","price":470.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/008abfc699ywonx8fd2pqgrbbnxt9nrmysls6d7t.png?v=1778346263"},{"product_id":"jackson-audio-blossom-compressor-pedal","title":"Jackson Audio BLOSSOM Compressor Pedal","description":"\u003cp\u003eAs a compressor, the BLOSSOM features an optical limiting circuit that takes its inspiration from compressors designed during the golden age of vacuum tube circuits. Optical compressors as they are called, are known for their transparency and subtlety. While the BLOSSOM can provide a very aggressive response at more extreme compression settings, its real strength lies in its ability to add a gentle sweetening and roundness to the tone as the optical circuit works to polish off any rough edges in the sound.\u003c\/p\u003e\n\u003cp\u003eBecause of its natural and touch responsive bloom, the BLOSSOM is ideal for players who typically don’t use compression but want the ‘mastered’ response that optical compression gives a guitarists tone.\u003c\/p\u003e\n\u003cp\u003eThe frequency response of the compressor section is flat as a board and does not boost or cut any of your highs or lows. Just like a well-designed compressor should, the BLOSSOM alters the dynamics of the guitar signal and not the tone. A good compressor should be felt and not heard!\u003c\/p\u003e\n\u003cp\u003eCLEAN BLEND\u003cbr\u003eWhen more subtlety is desired from the compression circuit, we have included a BLEND control that allows the player to blend in their clean, unaffected signal back in with the compressed signal. One of the best features of the Blend control is that it allows the player to dial in a really aggressive compression setting and then blend some of their clean signal back in with it. This produces the effect of giving the note a very natural attack while slowly fading in the sustain that comes from running a high compression setting.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430933000285,"sku":"BM302128186148","price":346.75,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/w-blossom-front_skinny.png?v=1778346405"},{"product_id":"jackson-audio-hour-glass-dual-analog-compressor-pedal","title":"Jackson Audio HOUR GLASS Dual Analog Compressor Pedal","description":"\u003cp\u003eChoose from Fast, Medium, or Slow Attack time options to tailor the pedal’s response to your playing style, and use the Treble toggle switch to select Flat, Medium, or High boost options to help shape your high-frequency tones.\u003c\/p\u003e\n\u003cp\u003eFrom warm, natural compression to soaring sustain, the Hourglass opens up a world of sonic possibilities for you to explore.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSet one compressor for single coil guitars, and the other compressor for humbucker guitars, and have precise tone and dynamic shaping when you switch guitars! Both compressors can also be engaged simultaneously for endless sustain!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eDiscover the freedom of expression with two independent circuits, that maintain the transparency of your guitar’s tone. Precision controls for Level, Sustain and Blend on each circuit allow you to sculpt your sound exactly as you desire. Built to withstand the rigors of time and the road, the Hourglass is your reliable companion on every musical journey.\u003c\/p\u003e\n\u003cp\u003eUnleash your creativity, transcend genres, and experience endless sustain with the Hourglass Analog Dual Compressor Pedal - Where Sustain has No Boundaries!\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430933131357,"sku":"BM649985702730","price":521.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/hourglasshero_1800x1800_bea989dc-af49-44e4-81ec-2b1bcf36a36d.png?v=1778346408"},{"product_id":"jackson-audio-bloom-v2-silver-comp-eq-boost-pedal","title":"Jackson Audio BLOOM V2 SILVER Comp \/ EQ \/ Boost Pedal","description":"\u003cp\u003eThe BLOOM from Jackson Audio is a comprehensive dynamic engine that is designed to give guitarists maximum dynamic tonal control in ways never before possible. The BLOOM v2 – MIDI takes everything people love about our original BLOOM and updates it with MIDI!\u003c\/p\u003e\n\u003cp\u003eThe BLOOM v2 – MIDI now offers MIDI control over all 6 compression settings, circuit ON\/OFF (COMP, EQ, BLOOM) and bloom level; the bloom level can also be expressed via MIDI!\u003c\/p\u003e\n\u003cp\u003eA three-fold device, the Bloom manipulates the dynamics of the instrument by way of precisely tuned optical compression, equalization, boost and sustain circuits which can be activated separately or in tandem with each other.\u003c\/p\u003e\n\u003cp\u003eKeep reading below to learn how the BLOOM has become a modern classic on countless pedalboards!\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430933229661,"sku":"BM302128186087","price":607.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/1febd74343ldb2hjdrsveaiiayioj2gazqjb72cl.png?v=1778346409"},{"product_id":"jackson-audio-bloom-v2-black-comp-eq-boost-pedal","title":"Jackson Audio BLOOM V2 BLACK Comp \/ EQ \/ Boost Pedal","description":"\u003cp\u003eThe BLOOM from Jackson Audio is a comprehensive dynamic engine that is designed to give guitarists maximum dynamic tonal control in ways never before possible. The BLOOM v2 – MIDI takes everything people love about our original BLOOM and updates it with MIDI!\u003c\/p\u003e\n\u003cp\u003eThe BLOOM v2 – MIDI now offers MIDI control over all 6 compression settings, circuit ON\/OFF (COMP, EQ, BLOOM) and bloom level; the bloom level can also be expressed via MIDI!\u003c\/p\u003e\n\u003cp\u003eA three-fold device, the Bloom manipulates the dynamics of the instrument by way of precisely tuned optical compression, equalization, boost and sustain circuits which can be activated separately or in tandem with each other.\u003c\/p\u003e\n\u003cp\u003eKeep reading below to learn how the BLOOM has become a modern classic on countless pedalboards!\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430933295197,"sku":"BM302128186117","price":607.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/7a3d333c68j0lnwfapazzfj2o0gs7fs0jch2iwkb.png?v=1778346409"},{"product_id":"jackson-audio-prism-silver-preamp-pedal","title":"Jackson Audio PRISM SILVER Preamp Pedal","description":"\u003cp\u003eThe PRISM was designed using a systems approach to tone shaping. While the PRISM contains many features and circuits, those circuits are precisely crafted to work in harmony with each other to create a unique tone shaping tool with unrivaled flexibility and performance!\u003c\/p\u003e\n\u003cp\u003eHoused in a custom designed stainless steel enclosure that features laser engraved artwork, the PRISM is one of the few pedals on the market that looks as good as it sounds! Keep reading below to learn more about what makes the PRISM so unique!\u003c\/p\u003e\n\u003cp\u003eEQ\/TONE SCULPTING\u003cbr\u003eThe PRISM was conceived between Brad and Nigel as a tool that players could use to unify their rigs regardless of the guitar being used. Since many guitarists will swap guitars but keep the same pedalboard and amp, we wanted to create a tool that would allow the players to re-voice their rigs for the guitar chosen and the +\/-15dB active EQ in the PRISM accomplishes this with ease.\u003c\/p\u003e\n\u003cp\u003eThis active EQ gives an incredible amount of tonal control and range and has ZERO interaction between the BODY and TONE controls. Having ZERO interaction means as the player adjusts the TONE it will only adjust the high frequency response and not cause the low frequencies to shift and the same is true for the BODY control.\u003c\/p\u003e\n\u003cp\u003ePerhaps the most useful feature of the active EQ in the PRISM is that when placed at the front of the players rig and used as a master EQ, the PRISM will allow the player to dial in their tone using ONE pedal and will prevent them from having to adjust the EQ of every pedal in their rig when changing guitars, amps or venues.\u003c\/p\u003e\n\u003cp\u003eBOOST\/PREAMP\u003cbr\u003eAs a boost\/preamp the PRISM contains three of the most distinct voices of boosts available. A transparent clean boost with no tonal coloring (TRANS), a boost that emulates a vacuum tube amp (AMP) and finally the boost circuit that started it all, the silicon treble booster (COLOR). These three circuits represent over 50 years of guitar effects from the earliest guitar pedal ever made to the more modern transparent voiced circuits.\u003c\/p\u003e\n\u003cp\u003eEach boost\/preamp circuit in the PRISM is totally discrete and shares ZERO circuitry with the other boost circuits. We did this so that each circuit would be completely true to its own voice and not have to compromise its sound for the sake of cost cutting or space economy. In fact every circuit is contained in its own true bypass loop so there is never any additional circuitry in the signal path.\u003c\/p\u003e\n\u003cp\u003eTraditionally most players will use a boost\/preamp pedal to drive the front end of a tube amp into overdrive and the PRISM does this very well given its huge amount of output however we encourage players to experiment by placing the PRISM at the front of their pedalboards and enjoy the host of new tones available as the PRISM boosts their existing pedals!\u003c\/p\u003e\n\u003cp\u003eNote: To take full advantage of the PRISM we recommend placing it first in the signal chain as its active EQ will be most effective in that position and the treble booster circuit (COLOR) works best when connected directly to the guitars output. Treble booster circuits in general are known for cleaning up very dramatically when rolling back the volume control on the guitar and the PRISM is no different. For these reasons we recommend that the PRISM be placed first in the signal chain.\u003c\/p\u003e\n\u003cp\u003eBUFFER\u003cbr\u003eThe PRISM is a true bypass pedal featuring our own silent switching circuitry and uses relays with a soft touch momentary contact footswitch to accomplish the bypass. We chose relay bypass because it is far more reliable than traditional mechanical true bypass methodologies and the relays themselves boast a lifespan of over 100,000 cycles!\u003c\/p\u003e\n\u003cp\u003eAt the very end of the PRISM we included a high current buffer that is used to strengthen your signal and preserve your tone regardless of how complex your pedalboard is or how long the cable run is back to your amp.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44430955872349,"sku":"BM302128186063","price":470.25,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/8386092d68lve2was1n3ogwcavftysakap4spswl.png?v=1778346672"},{"product_id":"jackson-audio-new-wave-analog-chorus-vibrato-pedal","title":"Jackson Audio NEW WAVE Analog Chorus \/ Vibrato Pedal","description":"\u003cp\u003eJackson Audio is excited to announce the release of the NEW WAVE, a stereo, 100% analog chorus\/vibrato pedal that uses real MN3007 BBD chips and a digital microprocessor for precise control, presets, and midi. The pedal has seven savable presets tailored for classic and modern Chorus, Vibrato, and Rotary sounds, including 70's, 80's, Rack, Vibrato, Rotary, Harmonic, and User Control. It offers five digitally controlled LFO wave shapes and unique phase control that allows for synchronizing or 180-degree phase shifting between the two LFOs. We had the pleasure of working with Grammy Winning Artist Mark Lettieri (Snarky Puppy) to create the ultimate chorus pedal. Please welcome a new way to NEW WAVE! As of 10\/25\/23, every New Wave comes shipped with both an individual 18v power supply, and a voltage doubler cable to convert two 9v spots (rated 300mA or higher) into an 18v supply for our muti spot power supply users.\u003c\/p\u003e\n\u003cp\u003eWe set out to make the best sounding and versatile 100% analog, stereo chorus\/vibrato pedal. To achieve this we knew we could not go digital but needed to add the features that digital products provide. Using authentic MN3007 BBD chips, operating at 15V like the 80's units did. This pedal delivers the classic sounds with added modern precision and all new sounds. Powered by a digital microprocessor, the pedal offers unparalleled control over the analog circuit for unmatched waveform accuracy and programmable presets, features and MIDI. Designed for guitar, bass and keys with an easy to operate interface. \u003c\/p\u003e\n\u003cp\u003eMODES\u003c\/p\u003e\n\u003cp\u003e7 savable modes each tailored for a classic chorus, vibrato or rotary sound. Every mode on the NEW WAVE was carefully curated by Brad Jackson and Mark Lettieri.\u003c\/p\u003e\n\u003cp\u003e70’S - THIS IS THE SOUND OF THE LATE 70'S AND THE ONLY MONO CHORUS IN THE NEW WAVE. SIMPLE MONO LFO ON THE LEFT SIDE MOVING AGAINST A STATIONARY DRY SOUND ON THE RIGHT SIDE. \u003cbr\u003e80’S - LEGENDARY STEREO CHORUS WITH TWO LFO'S MOVING AT THE SAME TIME. \u003cbr\u003eRCK - STEREO CHORUS WITH A PITCH INCREASE AS WELL AS A PITCH DECREASE! DESIGNED FOR A GIANT TONE!\u003cbr\u003eVIB - CLASSIC ANALOG VIBRATO WITH COMPLETE CONTROL.\u003cbr\u003eROT - USES PITCH MODULATION AND RATIO CONTROL OF LEFT AND RIGHT SPEED. THIS EMULATES THE HORN AND TWEETER IN A ROTARY SPEAKER CABINET.\u003cbr\u003eHRM - HARMONIC MODE MODULATES EACH CHANNEL IN A MATHEMATICAL RELATIONSHIP FOR SUPER INTERESTING NEW CHORUS SOUNDS!\u003cbr\u003eUC - USER CONTROL IS FULL CONTROL. WE DON’T PLACE ANY LIMITS ON THE USER SO YOU CAN MAKE THE PEDAL SOUND AS WILD AS YOU LIKE. YOU'RE IN CONTROL! \u003cbr\u003eFEATURES\u003cbr\u003e5 DIGITALLY CONTROLLED LFO WAVE SHAPES: SINE, TRIANGLE, SQUARE AND TWO CUSTOM HARMONIC LFO SHAPES INSPIRED BY THE ARP SOLINA KEYBOARD.\u003cbr\u003eMIX CONTROL TO BLEND DRY AND EFFECTED SIGNALS (DRY-CHORUS-VIBRATO).\u003cbr\u003eTONE CONTROL FOR SUPER DARK TO SUPER BRIGHT MODULATION TONES.\u003cbr\u003eDEPTH CONTROL ALLOWS FOR SUBTLE TO COMPLETELY SEASICK MODULATION.\u003cbr\u003eDELAY CONTROL TO ADJUST THE CENTER FREQUENCY OF THE CLOCK THAT CONTROLS THE BBD CHIPS AND ALLOWS FOR LOOSE OR VERY TIGHT AND COMPRESSED CHORUS TONES.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePHASE CONTROL CHANGES THE PHASE ALIGNMENT OF THE TWO CHANNELS. 0-180 DEGREES OUT OF PHASE AND MAKE FOR HUGE CHORUSING SOUNDS!\u003cbr\u003eRATIO CONTROL AND CHANGES THE MULTIPLIER OF THE RIGHT CHANNEL COMPARED TO THE LEFT CHANNEL. VERY COOL FOR PERCUSSIVE AND LESLIE STYLE.\u003cbr\u003eTAP TEMPO FOR SPEED CONTROL.\u003cbr\u003eBLOOM MODE FOR SWELLING ACTIVATION OF THE EFFECT.\u003cbr\u003eA PROGRAMMABLE SLOW AND FAST (RAMP) SETTING FOR USE WITH EITHER AN EXPRESSION PEDAL OR BY USING THE RAMP FT-SWITCH.\u003cbr\u003eMIDI CONTROL.\u003cbr\u003eEXPRESSION PEDAL CONTROL OF SPEED.\u003cbr\u003eTRUE BYPASS.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44431031664733,"sku":"BM702940700223","price":521.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/8dd854f531djjd77itm90ngo2jrmhx7whgyj9oyz.png?v=1778347217"},{"product_id":"jackson-audio-silvertone-twin-trem-dual-tremolo-pedal","title":"Jackson Audio Silvertone TWIN TREM Dual Tremolo Pedal","description":"\u003cp\u003eThe TWIN TREM features two distinct tremolo effects: a Harmonic Trem on the right side (RED)and an Optical Trem on the left side (BLUE), each equipped with independent Speed, Depth, and Volume controls. These tremolos can be used separately as stand-alone effects or combined (MAGENTA) to create rich, unique, and percussive sounds.\u003c\/p\u003e\n\u003cp\u003eBoth sides also include LED indicators that visually display their speed, making it easy to sync the two tremolos together.\u003c\/p\u003e\n\u003cp\u003eThe TWIN TREM boasts four top-mounted jacks, allowing versatile signal routing. You can run it like a standard pedal, routing the signal in through the first jack and out through the last. Alternatively, you can route the signal through the Harmonic side first, pass it through a reverb or another effect, and then into the Optical side, preserving the classic placement of optical tremolo after reverb, just like in many amplifiers. This opens up endless possibilities for integrating the TWIN TREM with other effects in your signal chain.\u003c\/p\u003e\n\u003cp\u003eIf you have a stereo setup, the right side can run through the Harmonic tremolo, while the left side passes through the Optical.\u003c\/p\u003e\n\u003cp\u003eThe TWIN TREM offers comprehensive control over pre- and post-effects tremolo placement, making it an essential tool for building a complete rig.\u003c\/p\u003e","brand":"Jackson Audio","offers":[{"title":"Default Title","offer_id":44431045951581,"sku":"JAUDIO-480220","price":474.05,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/8179\/7213\/files\/angle2_8d5251b2-9cff-4321-80b5-200f11345832.png?v=1778347341"}],"url":"https:\/\/gearstage.store\/collections\/guitar-pedals-effects-brands-jackson-audio.oembed","provider":"GearStage","version":"1.0","type":"link"}