Audix ADX-SCX25A Premium Large Diaphragm Studio Condenser

The SCX25A is a professional studio condenser microphone with an elegant design and a patented capsule suspension system. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the SCX25A delivers a pure, open-air sound with exceptional detail and realism.
The SCX25A is consistent when responding to on and off-axis signals. This mic exhibits outstanding phase coherence and minimal proximity effect. With a wide Cardioid polar pattern, the SCX25A enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The SCX25A large diaphragm microphone will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.
Affectionately referred to as “The Lollipop,” The SCX25A Cardioid studio condenser microphone is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra, and symphony sections.

Designed, machined, assembled, and tested by Audix in the USA.

MODEL VARIATIONS AND OPTIONS
SCX25AMP – Two SCX25A microphones in a matched pair.
SCX25APS – Piano system; Includes two SCX25A condenser microphones, two DFLEX mounts, two 20′ studio microphone cables, and an aluminum case.

What's in the box?
1x SCX25A Condenser Microphone
1x Metal Adapter To Accommodate 3/8″ Microphone Stands
1x Protective zippered carrying case
1x DCLIP Microphone Clip

Specifications:
Transducer Type Condenser
Frequency Response 20 Hz – 20 kHz
Polar Pattern Cardioid
Output Impedance 200 ohms
Sensitivity 28 mV / Pa @ 1k
Equivalent Noise Level 14 dB (A-weighted)
Signal to Noise Ratio 80 dB
Maximum SPL ≥135 dB
Dynamic Range 121 dB
Power Requirements 48-52 V phantom
Connector 3-pin XLRm
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish Machined Brass / Black Finish
Weight 244 g
Length 148 mm

• Elegant design and patented suspension system
• Shock-mounted capsule for sound isolation
• Phase coherence with minimal proximity effect
• Wide Cardioid pattern blends instrument and room sound
• Handles sound pressure levels over 135 dB
• Up to 20 dB ambient noise rejection
• Ideal for capturing acoustic instruments
• Machined brass with black finish, made in USA