Tascam MODEL-16 Hybrid Mixer / Multi-Track Recorder

14 Inputs for Complete Flexibility
14 easy-to-access top-panel inputs provide flexible options for microphones or instrument connections, including 10 Mic/14 Line/2 Inst to allow easy access for connecting microphones, instruments or other audio sources for live recording or mixing. A Bluetooth 5.0 enabled Stereo Input Source Channel also provides stereo RCA and 1/8" Stereo (selectable) jacks for streaming audio device level control.

Pristine Audio Quality
Mic Inputs 1 through 8 deliver pristine audio quality, featuring TASCAM's Ultra HDDA (High Definition Discrete Architecture) technology for pure, transparent natural tone with ultra-low noise.

Professional Channel Strip Control Features
A tactile Gain knob tops each channel for precise tweaking of input levels. A push-button Lo-Cut filter and three-position Input Selector (Live/PC/MTR) facilitate quick and precise control of input source signals. A 1-knob inline Compressor is available on inputs 1-8 as is a mid-range sweepable 3-band EQ.

Maximum Audio Routing Possibilities and Monitoring
3 Aux bus (MON1, MON2[pre/post], FX) and PFL Listen round out the Model 16's pro-level signal path routing options. A Sub bus provides an additional stereo lineout source to the master SEND section.

3 AUX Outs let you route the audio signal for stage monitoring, or to external gear such as outboard effects, signal processors or headphone mixes. And the Footswitch control jack provides additional monitoring and control features.

Monitor Your Signal Virtually (Added in V1.40）
With the Model Mixer Settings Panel app, users can take advantage of a digital meter bridge across by connecting the Model 16 via USB to a PC or Mac. Set peak hold times, monitor the input, MTR or USB signal all while being able scale the GUI from a small window to full screen. Take it a step further by porting the app from your computer to a dedicated monitor of your choosing.

Features at a Glance
16-track multi-track recorder (WAV, up to 48kHz/24-bit) to SD, SDHC and SDXC cards (Class 10 or higher required)
 Punch in/out capability (up to 8 tracks simultaneously)
 Built-in USB Audio Interface to send/receive (16-in/14-out) audio data to/from DAW
14 inputs (10 Monaural XLR/TRS balanced and 2 Stereo-paired TRS balanced)
10 mic Pre-amps utilizing TASCAM Ultra HDDA Mic Pre-amp technology (CH 1 thru 8)
Pre-amp Gain Controller with Signal/Over-load Indicator (CH 1 thru 12)
Input Mode switch (LIVE/USB/MTR) per input channel
1-knob compressor (CH 1 thru 8)
3-band EQ with a sweep-able mid-range frequency (CH 1 thru 8)
100Hz Low-cut Filter (CH 1 thru 12)
Bluetooth® 5.0 input supporting both AAC and SBC codecs
Hi/Lo shelf, wide and narrow-Q semi-parametric EQs (for Main and SUB outputs)
16 TASCAM Effects like reverb, delay, chorus and flange
Dedicated Settings Panel application with Meter bridge (Added in V.1.40)
MAIN Output via XLR balanced and SUB Output via TRS balanced connectors
1 Stereo Output for Control Room
REMOTE connector for a Foot Switch (TASCAM RC-1F)